...be fixed Could be an abs wheel speed sensor. bcm is correct. Gauges --- not sure,you need to fix one thing at a time. Scan bcm and repair codes first (traction control/abs sensor) what ever
asb light on could be as simple as a brake light burned out or as expensive as the ebcm (main abs computer) Need to see what codes are stored first.and ck all the brake lights.
...controll light came on. Likely, a bad wheel bearing or bad tires alignement, also, there is a ABS wheel sensor that is on the hubs on these vehicals that should be changed if the light that you ...
...abs not working possible whl brn could do this as well so start at the brakes if you can check front and rear then check whl sensors the wires sometime break in the front first or check fuses to see ...
ABS codes and it'll tell you exactly what sensor has failed. It would be worth it to pay a shop to scan the ABS codes so you don't have to replace all of them to make sure you get the right one. I got
...ABS system scanned for trouble codes. Your local parts store may be able to do this for free otherwise you will need an ABS specific code reader, a high end multifunction scan tool, or bring it in to ...
abs light why is my abs light on Because the computer has detected a problem and set a code.
...gone bad and my abs light is on If the booster failed the brake pedal would take a huge amount of effort to stop the car. You should have the computer checked for trouble codes if the ABS light is
...in the pedal as I slow from 8 to 5 mph. Any thoughts, I am suspecting something faulty in the ABS system. you might be right. it's could be cause by front speed sensor. one of the speed sensor ...
Question about 2005 Cobalt
...cobalt 2.2 I have a traction light on in the dash in it wouldn't go off Get the trouble codes read. That's ALWAYS your starting point ABS light on TRAC off Stabilitrac Ricks Free Auto Repair ...
Usually answered in minutes!
1,428 Questions
818 Questions
485 Questions
212 Questions
74 Questions