Questions & Answers for: abs censor

My dodge ram 1500 abs light is flashing what could cause it. changed the censore and still flashing. before i changed it the brake light and abs was on. What size tires are you running? The ABS light ...

Ad

...can I find the speed censor for yukon where can I find the speed censor for Yukon in the transmit ion there is 4 wheel speed sensors on each hub. your speedometer is controlled by your abs

Ad

Question about 1988 K 100

1 Answer

...her up put on the frount and back brake together,,,this should put out the red light,,,,if it dont you have an ABS censor fault clean the censors and the ABS gearwheels on the wheels and reset the ...

THE ABS LIGHT IS ON AND I CAN NOT GET IT TO GO OUT. start by checking the abs censors one of may of gone bad and need to be replaced. if not it may be the abs system its self.

...problem i would check all the wiring for the abs censors as well i know my daytime running lights and my panel functions all stop at once it was the abs censor at the drives side wheel. hope this ...

Question about 2005 Avalanche

1 Answer

...job front and back the abs sensor is reading low prime pressure,sometimes you may have disconnect battery for about 3 to 5 min then reconnect battery it should then reset abs censor,hope this ...

...abs light on changed left speed censor broke censor wire replaced censor if you broke sensor wire at the electrical connector.the dealership more likely can get you another sensor connector with ...

Question about 1999 Rodeo

2 Answers

...of your wheel abs censors are bad. You can go to advance auto and they can read the code for free and let you know which censor is bad. They normally run about a 100 per censor depends on your car ...

...trooper 4x4 automatic my check rear wheels is on, why? do you have abs on the car is there a problem with the censor or is there a censor for wheel presser is there a tem censor for the diff for ...

Question about 1999 Rodeo

1 Answer

...abs system i already changed wheel bearing twice There is a censor on every spindle, the censor is bad, or the censor could be unplugged, you have one on every spindle front and back. It just takes ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...