Questions & Answers for: Hyundai Elantra 98 degrees

cant find starter motor on 98 lantra wagon i have a new starter motor for 98 lantra auto wagon cant find exact location but i know it is on r/h side of engine bay. is it easy to change as i have ...

changing front disc on a 1997 -98 lantra lantra 1997-98 front disc http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280073d3a

I need to know how many foot punds the head needs On a 2001 hyundai elantra with a 2.0 liter I need to know how many foot punds the head needs to be torqued down the m10's bolts are 18ft.lbs. + 60-65 ...

My passenger side headlight burned out, soI changed the headlight bulbs (both), and the passenger side reflected 40 or 45 degrees into the air rather than straight, I've checked it severa; times to ...

...on a 98 hyundai elantra The cylinder head bolts need to be torqued at 10MM bolts 22 FT-LBS 12mm bolts 26 FT-LBS + 60 degrees and then another 60 degrees.That torque will leave a blown gasket for

1998 Elantra: i need timing marks for 98 elantra 2.0 1.8 l... i need timing marks for 98 elantra 2.0 1.8 l the camshaft is the dot on the sprocket there is a small mark behind it on the cover 12 ...

my elantra 98 shutting off while running, what can... My elantra 98 shutting off while running what can i do? I replaced the oxygen sensor and still with the problem. could be the crankshaft position ...

What are the torque settings of the j2 1.8GLS 1996 hyundai elantra cylinder head bolt torque 10 mm bolts step 1 22 ft lbs step 2 additional 60 degrees step 3 additional 60 degrees 12 mm bolts step 1 ...

big ends torque settings head torque settings 10 mm bolts step 1 22 ft lbs. step 2 60 degrees step 3 additional 60 degrees 12 mm bolts step 1 26 ft lbs step 2 60 degrees step 3 additional 60 degrees

...98 1.8L (VIN M) engines- Tighten M10 bolts to 22 ft. lbs. (30 Nm), plus 60-65 degrees, plus 60-65 degrees. Tighten M12 bolts to 26 ft. lbs. (35 Nm), plus 60-65 degrees, plus 60-65 degrees.Hope this ...