Questions & Answers for: Chevrolet Silverado 1500 98 degrees

98 to torque the head bolts to 22 ft lbs and than the short bolts 45 degrees, medium 55 and long 65 degrees Those bolts are "Torque To Yield" bolts. You should be using new head bolts, tighten them to

tail lights and dash lights in 98 Silverado don't work Brake, turn signal, haz all wofk fine, all fuses seem good in panel and under hood, can't find a bad looking wire, I'm at a loss here. Any ...

98 chevy s-10 codes p0131, p0171, and p1133 I have a 98 Chevy S-10 p/u truck with codes p0131, O2 sensor circuit low voltage (bank 1 sensor 1); p0171, system too lean (bank 1); and code p1133, ...

what is the torque rear end bearing cap on a 1500 1999 chevy Main Bearing Cap Bolt 4.3L Step 1 15 (20) Step 2 Additional 73 Degrees 5.0L & 5.7L 2-Bolt Main 77 (105) 4-Bolt Main Inner 77 (105) ...

Outside temperature reading on my 2009 Chevy Silverado truck is always 4-8 degrees lower than the actual outside temperature. the outside temperature sensor on vehicles takes the temperature of the ...

need to stop better need new calipers for 98 chevy 1500 silverado need to stop better need new calipers Hold on, more infromation is needed. What model 98 Chev do you have. When did the problem start.

93 chevy 4x4 with a 4l60e tranny. will a 98 tranny swap? I have a 93 chevy 4x4 with a 4l60e tranny. I wanna know what other years of 4l60e's will swap. im looking at a newer truck possibly a 97 or 98.

CRANK SHAFT TORQUE SPECS 4.3 Crank shaft torque specs 4.3 rods 20 ft/lb plus 70 degrees. mains 15 ft/lbs plus 73 degrees

...98 chevy 5.7 cortec 350, the truck starts and runs but sometimes it backfires and misses... ive changed the cap and rotor, the crank shaft and cam shaft sensor are good i do have a p1345 code... my ...