Questions & Answers for: 86 nissan truck

NIssan d21 86 model headlights hi, have a nissan navara D21 86 model and headlights keep blowing within ten minutes of putting new ones in, fuses are all ok, any ideas where the problem is?? dont ...

...86 Nissan Stanza runs rough till warmed up A buddy of mine has an '86 Stanza. He says that when he starts the car, the sensor light comes on, and the engine bucks really bad, until it warms up, then ...

...turn but wont start. the truck is an 86 nissan hardbody with a 3.0. i had to pull the heads and replace all the valves. the timing belt broke on me. make sure the timing is correct and the firing ...

nissan altima 1995 2.4l Tighten head bolts using the following procedure: Tighten all bolts to 22 ftlbs. Tighten all bolts 59 ftlbs . Loosen all the bolts completely. Tighten all bolts 18 to 25 ftlbs

need to know which years are interexchangeable for tail-lights and front marker lenses with a 1985 nissan king cab 720 85-86 is the same for the taillights 83-86 for the markers

86 Nissan Hardbody lost power to all gages and all lights I have an 86 Nissan Hardbody. Lost power to all gages and all lights. Runs straight off of battery. I replaced Ignition switch, alternator and

...Nissan service manuals ... 1984-86 200SX and 300ZX-disconnect the fuel pump connector in the right rear tool ... z All 1984-86 port-injected models (except Pulsar with1.6L engine): 1. ... Turn the ...

...nissan 720 4x4 pickup On the the 86 year,they changed to the fuel injected in 86.5,Do you have a carburetor?I have a 85 Nissan service manual I got from the dealer.The 85 and 86 with the carburetor ...

...on 86 Nissan 300zx? http://www.zcar.com/forum/10-70-83-tech-discussion-forum/291457-where-ignition-control-module-located-83-a.html ignition control module located on 86 Nissan 300zx Google ...