Questions & Answers for: Hobart 80 degrees

not reaching temp i have lx18 under counter that only displayes 170 degrees suppose to sanitize at 180. On the machine that we have, there are two [2]push button switches in line for the heater tank. ...

...not working assuming that this machine has worked in the past to produce final rinse water above 180 degrees. Remove the bottom panel and to the right you will see the booster tank, look for a ...

...work off of 140 degree water, or does it have to have a booster heater to boost the temperature to 180? Tom I'm a hobart tech.If the dishwasher is going to be a cold machine you need 140 degrees,if ...

Just need to know is hobart m-800 an 80 or 60 quart hobart m-800 It's a 60 Qt model. 200 = 20qt 300 = 30qt 600 = 60 qt 800 = 80 qt Your 800 is a 80 qt mixer & you can also use smaller bowls & ...

just purchased a used LXIh4 temp on diplay only goes to 155F first run went to 170f but susequent load only went to 155 unit is fed with 120f supply The incoming water determines how fast the DW is ...

...80 degrees and doesn't get any hotter when normally it goes up to about 118. Can we still use it to wash or is something wrong? A hobart LXIH-3 uses a chemical to sanitize however a 120 degree wash ...

...80 degrees. I see the push buttons on the control and wonder what they are for. Here is a Hobart link that may help. ...

80 degrees Hello, There are 2 heating elements, one for the Rinse tank/boiler and one for the wash tank check that the rinse tank heater has not tripped out can be reset if they have one on that model

Thermastate isnt reading right how to recalibrate Temp is set at 200 and it's 350 in oven If your oven is 150 degrees out of calibration you need to replace the thermostat. More than 50 degrees and ...