Questions & Answers for: Ford 80 degrees

Question about 2001 Escort ZX2

1 Answer

...80 degrees. Please help Prior to charging the system, did you vacum it down? If you did not when there becomes a load on it the low pressure switch will kick the compressor off to avoid damage to the ...

Ad

Question about 1991 F350

1 Answer

f-350 diesel 1 ton is really cold blooded and takes 20 minutes of warm up before it will move even in 80 degree summer temps bad thermostat

Ad

Question about 1997 Explorer AWD

1 Answer

80 degrees or warmer outside. When the mechanics check the codes, everyting looks fine. Could it be the ignition switch or the crank sensor going bad??? Thanks! Michelle Check the exhaust compression.

Question about 2004 Thunderbird

1 Answer

...it has a "standpipe" type leveling system. to check fluid level the tranmission has to be within 80-120 degree f. take the plug out of the center of the fitting located on the bottom of the trans ...

...80 degrees in the summer. The speedo and fuel guage works most of the time. In the afternoon when temps get to over 100 degrees the speedo and sometimes the fuel guage dont work untill the interior ...

...time! cranks no spark to plugs. no probs in cool and cold weather. probs during hot weather. aprox 80 degrees up. Do these Fords have a crankshaft position sensor? What about a faulty ignition

Question about 1993 Ranger SuperCab

1 Answer

...80 degrees, and A/C on. I would start with checking the fan clutch if thats fine do a completed cooling system flush and replace the thermostat if you are still having problems replace the water ...

...the problem. Depends on whether the car itself is running cool.  If the car is running in the 80-90 degree Celsius mark then a thermostat won't help you.  If it is running cool then

80 degrees outside.!! Garbage in=Garbage out. Here is a video link from Youtube. There are 2 sensors, 1 for the guage and the other tells the on-board computer how hot/cold the coolant is. The one for

...80 Nm (59 lb-ft) Stage 3: 90 degrees After the final torque of 90 degrees, check the bolt stretch with a torque angle gauge. The stretch should be between 0.15mm and 0.30mm. Connecting rod bearings: ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...