Questions & Answers for: Xerox 7300

Phaser 7300N paper jam The 7300 we have keeps jamming at the fuser, the paper will get 1 inch out of it and there it stays... we have replaced the fuser and the exit senor and have the same problem...

Phaser 7300 Error Code/Message I have a Xerox Phaser 7300 service call fro Monday and the end user stated they were getting a U6 error code/message. Not sure what that is? Thanks Mark Seems to be ...

phaser 7300 jamming manual feed The manual feed of Phaser 7300 jamming. Attempt to pull but misfeed and then jam. Can you print fine with no jams from the lower tray? make sure you have clean new ...

Xerox Phaser 7300 color misregistration My Xerox Phaser 7300 has a color misregistration or alignment problem. I can see a very slight crescent of magenta on the color balance test page and text shows

Hi, Running MAC OS 10.6.3, but won't recognise our Xerox Phaser 7300 Laser printer. All the other MACs running 10.4 and 10.5 print without a problem. Logged onto Xerox website and downloaded the ...

...do not align Apparently, turning the unit off for 30 seconds, then back on will force the Phaser 7300 to do a color alignment procedure (according to Xerox support). Then, if the problem persists, ...

i have a xerox phaser 7300 the display is saying install or reseat cyan cartridge, yet i have taken the cartridge and the imaging uit out and reseated and it still says the same any idea ? This is a ...

I have a Xerox phaser 7300 that keeps telling me to install or reseat the black cartridge It is slightly unusual for it to be the black toner cartridge (usually cyan or magenta) but this issue is ...

help with u2 code on phaser 7300 I bought a used phaser 7300, it is havivg a u2 code. Can someone help me please U2 is an engine EEPROM failure - you'll need to replace the main board to fix that, I'm

error codes for 7300 007-277 Sounds like a hardware issue: Error 007-277: Tray 4 Paper Size Sensor Broken (TTM)