Questions & Answers for: 6 screwdriver Vacuums

...Black & Decker circular saw Cannot find a "lock" to hold the blade. How do I remove it? I drp a screwdriver through one of holes in the blade; that "locks the blade" when the screwdriver comes up ...

...plastic cover. How do I remove it? Got the same ! Remove both back wheels (just pull gently with a screwdriver), then with a big screwdriver pull the cover while pulling plastic locks in the side ...

...of the motor. There is a special tool for this but it can be achieved as below. You will need two screwdrivers smallish but still strong/stiff enough. At the 3 o'clock position insert one ...

...of the bottom of the unitI tried prying iy out and broke a piece of the base off?? You need a small screwdriver to take the plate over the battery off. You have to remove the control module from the ...

How do I put a belt on the carpet shampoing attachment on Kirby Heritage 11 This will require 2 phillips screwdrivers. Insert the screwdrivers into the screw heads and unscrew one side while holding ...

...to my Miele S5981. I had to unscrew the two star screw by the suction neck and with a flat head screwdriver adjust the bag indicator gradually while running the vacuum cleaner. I turned the white ...

None of the screwdrivers fit- also which screw- there are 2 to the right of oil receptacle Probably "TORX" screws. These are screws with a "star shaped" insert to put the screwdriver into. A hardware ...

How do I change battery. What type of Screwdriver would I need. DC35 Dyson Vacuum you dont need a screwdriver this video will show you http://rasacorporation.com/

...top cover by releasing two tabs underneath to allow the cover to flex so you can remove it. Stick a screwdriver in to move the cover out enough to be released. Remove the belt from the motor shaft, ...

I need a replacement screwdriver for a 20 year old machine Exclusive screwdriver #283394 Sorry we do not sell parts or have any parts locator service here.