...penetrant (PB Blaster or WD-40)on each screw letting it soak in overnight. Then using as short of a screwdriver ,with the best fit to the screw, as you can fit under there put it in the screw head, ...
Question about Creative 7570
...end of the machine, get something that looks like a chisel or something that has a flat end even a screwdriver, put the end of the screwdriver in a slot on the left hand side of the stop motion and ...
It is impossible to align the blade of a screwdriver with the slot on the head of the adjusting screw on the bobbin. Is there a special tool? Yes, use small jewler screwdrivers. but be careful. The ...
...manual, please go to Brother.com and download one for free. Also, to change your needle without a screwdriver, use a nickel or dime. Sometimes that works better than a screwdriver and won't strip ...
...to replace the entire needle shank when a needle breaks. The Embellisher comes with two alan key screwdrivers for changing needles. Insert the larger screwdriver at the red marking to loosen the ...
Question about Drop-In Bobbin 16231 Mechanical Sewing Machine
...Cleaning and oiling the machine 1 Unfasten the top, bottom, side and handwheel covers, using a screwdriver. Set the covers aside. 2 Remove the plate that covers the thread bobbin. If it is ...
Question about SE400 Computerized Sewing Machine
screwdriver given with the machine is not useful to unscrew the screws on the needle plate the screwdriver with a handle is for something else. the one the is a circle metal with a small jutted out ...
Question about SE400 Computerized Sewing Machine
...I want to change the needle but the screw is too tight. How do I fix it? You might need to use a screwdriver and a pair of pliers (and 3 hands) to loosen the needle bar set screw. Put the ...
Question about SE400 Computerized Sewing Machine
...bobbin case spins but latch doesn't release the case. It's a Bernina 740. The bobbin is empty Use screwdriver to break open bobbin case. Use new bobbin case. Uh, I think I'd take it to a
...a huskavarna viking. My needle threader broke. I bought a new one. My problem is trying to find a screwdriver to fit the machine. I don't know what kind or size and I can't find a screwdriver to
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions
