Questions & Answers for: 6 screwdriver Juicers

have pulled it with all my strength; however, it does not budge. I even tried to pry it off using a screwdriver. Can you help me? This is a response I received from Champion Juicer- I am amazed at how

The orange screw is not working so that I can't clean my juicer Help! use two screwdrivers as the pins and move them together as if they were a unit. Have someone else hold the filter for you.

Cutter is stuck onto shaft, how can I remove it? Hello, I bought a used champion 2000 juicer and the cutter is stuck onto the shaft. I tried to use a screw driver to help remove it, but it looks like ...

...I looked all over for the disassembly instructions for the JM300 to no avail...so I got a flathead screwdriver and decided I'd either get the darned blade out or break it for good. It took some ...

...try applying very hot water to the point where its stuck then tap it with something like a plastic screwdriver handle.Use your judgement on how hot the water should be by considering the surrounding ...

...are an exact fit like the old ones. Might have to file it down a little and tap it in with a flat screwdriver. Also once installed if its a little snug fitting over the cover file the tip down till ...

...use something like WD40? Do not use WD40. Wear heavy leather work gloves. Lightly tap two flathead screwdrivers positioned opposite each other to initially pry the blade apart from the main body of ...

...its not the fuse in the plug. Any ideas what to do next? Thanks Cannot get screws out......which screwdriver

problems dismantling champion juicer My blade/cutter is stuck and I can not get it off. It's like a suction is created. I have had this happen. I managed to get mine off with a blunt knife to give a ...

The piece with the teeth on it will not slide off the motor shaft. It is probably stuck from carrot juice. Suggestions? Get two flat blade screwdrivers. It works best if the screwdrivers are short ...