Questions & Answers for: Krups 6 screwdriver

...or unscrew or what? Thanks in advance... it's not easy. you will need a set of pliers, a flathead screwdriver, and a phillips screwdriver. first, remove the 4 rubber plugs from the bottom of the ...

Inability to access insides Light comes on but no heating. How do I get a screwdriver to open the irritating user-proof screw on the bottom? if the screw has an internal star configuration then it is ...

...to get from Germany. What size is the hex on the security screws? I took a small (cheap) slot screwdriver with a blade just wide enough to fit into the wide part of the screw. I then took a ...

...the grinder by removing both knobs. The front knob is held in place by friction. Use two flat head screwdrivers to pry it off. The side knob is held in by tabs you have to push. Pry forward to

...disconnected. In order to get the bottom off you need a Torx internal tamperproof pin (6 lobe) screwdriver to get the 5 screws

clean? Yes!!! by the word lid do you mean the top or swing out filter holder? If you use small flat screwdriver you can expand plastic at hinge enough to pull apart

...How would I locate such a tool? Pete I carved off the rubber with a knife; inserted a flathead screwdriver throught the slot in the bottom to hold the gear in place; using pliers I unscrewed ...

...clean the motor On the bottom of the Grinder, You will find several Rectangular holes. With a flat screwdriver push tangs to release bottom. In main shaft, there is a small slot for a flat screw ...

Krups espresso machine pumps water out not through nozzle Water when pumped does not flow through filter Chances are that the input and or output tubes within base of machine are clogged, If running ...

...the blade guard and blade by loosening the blade retaining screw with a Phillips head screwdriver. Remove the slicing carriage by pressing the carriage lock lever and pulling the ...