Questions & Answers for: Jeep 6 screwdriver

Question about 1997 Grand Cherokee

1 Answer

how to take off map light cover Insert a flat blade screwdriver in slot at the center of the lamp housing, rotate screwdriver upward and unsnap dome lamp lens. Pull lens downward and remove it from ...

Ad

...the seven millimeter bolt near the center top of the assembly ... then take a good size flat head screwdriver in behind the whole assembly and with a quick motion pop the assembly forward with the ...

Ad

...it is the starter or ignition switch. To shade tree test the starter you can jump it out with a screwdriver, this is sort of tricky if you have never done it before. Someone will need to turn the ...

Question about 2002 Liberty

1 Answer

I am trying to replace my right turn signal on my jeep liberty but I don't seem to have the proper screwdriver to take the old one off can you tell me the proper screwdriver to use? Does it look like ...

...To replace the turn signal bulb on Your car is quite simple, all You need to do is to get a screwdriver and follow the steps below: Open the hood and locate the mounting screws for the ...

Question about 1998 Grand Cherokee

1 Answer

...but cant tell if i have spark, whats wrong Pull a spark plug wire off a spark plug, insert a screwdriver into the plug and replicate a spark plug gap using the screwdriver against the valve ...

...6 cyl. stright Things You'll Need Waste oil collection pan Needle nose pliers Phillips head screwdriver Wrench set Socket set Antifreeze Water Draining the Cooling System 1 Locate the petcock ...

1990 jeep wrangler 2.5l. my son put a radio in and now the jeep wont start with out using a screwdriver on the starter. what did he do? thanks. you have to turn the key and than get under and jump ...

Question about 1997 Grand Cherokee

1 Answer

...does is make a clicking noise,same thing for clock wise THis can be a little hairy, but use a big screwdriver or a cold chisel and use a hammer to tap the screwdriver on the right side of the cap, ...

...liberty jet left front door regulator The tools needed to remove the door panel include a flat head screwdriver, a Phillips head screwdriver, and a 10 mm socket wit ratcheting wrench. To remove the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...