Questions & Answers for: Hampton Bay 6 screwdriver

ceiling, if its a false ceiling and you can get to it. or else you will have to use a big flat head screwdriver to pry it loose and touch up the ceiling later

disassembly insrtuctions I have a hampton bay ceiling fan thats about 5 yeayrs old, and would like to install a new HB ceiling fan, but can't see how the old one comes down, Get up there with ...

...doesnt spring back out towards the bulb base like its supposed to. to fix it u need a small plastic screwdriver or a wooden fingernail tool...ask your wife she probably has a dozen of em...SHUT OFF ...

...metal bell shaped piece does not turn. My plastic ring would not turn either. I took a flat blade screwdriver and stuck it between the plastic ring and metal bell shaped piece. I gently pryed the ...

...bulb connects with when you screw it in. To fix this turn off the power the get a straight edge screwdriver and pry that piece of metal back up. If none of this works I would check all wire ...

...base is left in the socket, you'll need to bend the edge of the base inward a little with a small screwdriver. Then grab the base with needle-nose pliers and unscrew it from the socket. Again be ...

...to the revolving part of the fan motor housing. Turn The fan OFF and check all the screws (using a screwdriver) that hold the irons to the fan. You'll probably feel one iron wobble. If you do, ...

...out how to in tall blades have installed lots of fans have never had this problem. Can't get screwdriver in there because of light housing in the way instructions of no use help please They ...

...3 speed switch in hampton bay ceiling light Remove the switch housing from the fan with a Phillips screwdriver. Depending on the model, there are either two attaching screws on the base of the

...bulb goes in, the contact should be up off the base at an angle. If its flattened down use a small screwdriver to pull it up a bit so it will make contact with the bulb. Make sure you have the power ...