Questions & Answers for: Casio 6 screwdriver

...I can see a flat screw head. The screw head slot is so shallow that I can't unscrew it with a watch screwdriver. Do you have any suggestions? Thanks Peter solutions already mentioned(casio wristband) ...

...fiddely to reassemble but I got there and it seems to work fine now! Make sure you have the correct screwdriver and exert pressure on the little screws when loosening so as to avoid slippage with the ...

...as removing the clip that covers the battery on the Waveceptor 2735, I found that even my smallest screwdriver was too big but a pin from my wife's sewing machine worked well. I poked it down on the ...

...The other end of pin seems to have a fine slotted head as if it needs to be undone by a really fine screwdriver. Can you please tell me what to do as I don't want to be applying pressure to push out ...

...and second hand There is a tool available in the market to remove second hands. If you have a watch screwdriver you can easily remove both the hands. Just keep the screwdriver in between minute hand ...

...both ways and don't seem to move. Is there some trick or special tool I need? Yes, You need two screwdrivers. One for each side. One screw on one side is long and goes all the way through the ...

...me twice. (Yes, I am a bit clumsy with minute parts.) Once found magentise a jewellers crosshead screwdriver. Pickup the spring with the screwdriver and adjust so that it sits end to end with the ...

...replacement of batteries? Also, need to know placement of springs. Found a third tiny spring on my screwdriver magnetic) which may or may not be part of the watch…

...mechanism. 3- Undo the 6 clips round the circumference of the mechanism with a pin or watchmakers screwdriver. The top half should come loose. There is also a 7th clip which can be more easily ...

Screw driver needed to replace battery for Casio Wave Recepter 3140 Fixya does not sell screwdrivers. A standard watch repair screwdriver set should do the trick.