Questions & Answers for: 636 no start

...636 on the side IF WATER IS NOT TURNING IN PUMP BASKET IT IS YOUR IMPELLER AS THIS IS A COMMON PIECE THAT BREAKS ON THESE PUMPS MAKE SURE YOU HAVE ALL CONNECTIONS TIGHT AND ALL VALVES ARE OPEN TRY ...

I have a Singer Touch N Sew Model 636. The I have a Singer Touch N Sew Model 636. The problem I am having is that it will not pick up the bobbin thread when trying to thread the machine to sew. I had ...

...636 had a dead battery. New battery, charged, and still nothing. Hollowed out tip over switch and fixed the problem (bike was wrecked). Bike turns now but will not start. I have the FI light on my ...

...636-msf 6" ROS has intermitten problem with starting. It works fine one moment. THen suddenly I can not start it, then it starts when it was unplugged for a while. I looked if it was jammed with gunk ...

i let my o6 ninja 636 sit for 3 weeks and when i tride to start it. it will start and idle a 1000rpm then will die out I had mine do that...it was the battery.

...636 and it won't start unless I have a 2004 ninja 636 and it won't start unless the stand it up and the clutch is in! I put a new stand sencor on it and still the same problem? look at a ...

Problem starting a motorcycle Starting the bike See if you have gas in tank

...636 a jump start & hooked the jumper cables up backwards and now I can't get it to start. What could I of fried because I checked all the fuses on the bike expect damage to the ECM as they fry easily ...

...636 will turn over but want start Were to start fuel pump is running no gas coming from injection itbjust spens over first check pressure at fuel rail, if low or no fuel present change filter and ...

...636 it turn over but wont start fuel pump is good plugs . and it firing 636 Error is Crank Position Sensor - Check Wiring for short to Ground - Chaffed Wire Or Damaged Insulation - Contact me for ...