Questions & Answers for: 5th reverse

...5th gear synchro, which is on the same selector rod as reverse gear. This has cured the problem. The synchro cost me £140 from Honda. Hope this is of some help to you. Hi! Marc, is this a manual ...

Ad

...5th or reverse It runs great just bought it but now it wont shift into reverse or 5th gear. It shifts into these gears reallyt easy but the effect of 5th or reverse doesnt occur I shift into reverse ...

Ad

Question about 2000 Expedition

1 Answer

...5th r reverse, transit i couldent get 2nd,4th or reverse, i changed the 2 cables and gear selector, now i can get 1st,2nd,3rd,4th but can not get 5th r reverse, if i disconect the cables i can find ...

Question about 2005 Elantra

1 Answer

...in the mean time? I am going to assume this is a manual transmission, if it is 5th and reverse are on the same selector set, the only solution is to strip the transmission and check out whats

Question about 2005 Elantra

1 Answer

...5th and reverse. Other gears are fine. Any ideas? The syncros are going bad on that shaft. The 5th gear and Reverse are on the same shaft. You will have to bring it to a shop to have the parts ...

Question about 2005 Elantra

1 Answer

...reverse or 5th gear spot) then I would guess you you will need to pull the top cover off, and slide the "fork" back onto the shaft. I have seen this happen before. I guess if my response wasn't ...

...5th or reverse, however it will go into gear 1 to 4 5th and reverse gears are on the same selector rail. It is possible that the selector fork has come loose for the 5th gear or reverse. Remove the ...

reverse or 5th - Over last month 1- started getting hard to get into gear, 2-popped out of 4th several times while at speed, 3- Just lost 5th and reverse, it will go in to both, but whirrs high if try

...reverse and 5th. I don't even use 5th anymore and reverse is a everyday battle. Could this be a retaining ring or shift cable. I need a second opinion Yes 5th is above reverse on the shifter Check ...

...5th anymore everytime I go to change into 5th it always grinds plz help check the linkage set up as 5th and reverse are on the same selector rail sound like you are trying to get reverse and not ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...