Questions & Answers for: 5 3 rear intake

Ad

Question about 2004 Endeavor

2 Answers

...INTAKE (TOP LEFT REAR). THIS WILL GIVE YOU ACCESS TO THE REAR PLUGS. REMOVE THE SENSORS BRACKET OR HOLDER ( ON THE LEFT JUST LIFT UP TO REMOVE) AND SWING THE INTAKE TO THE RIGHT. UNPLUG THE PLUG ...

Ad

Question about 1996 Explorer

1 Answer

upper intake manifold in the rear. It is locate in the lower intake manifold in the rear right below the upper intake manifold. It is really hard to see but if you get a mirror you can probably see it

Ad

...intake manifold. Remove EGR pipe. Disconnect fuel lines at rear of engine. Remove AC compressor and set aside(leave hoses connected). Remove canister purge solenoid. Disconnect theSCPI injector, ...

...rear of the lower intake Temporarily reattach the negative battery cable, then pressurize the fuel system (by cycling the ignition without starting the engine) and check for leaks. Disconnect the ...

...and rear alternator mount bolt then remove the bolts holding the upper intake to the lower intake. Now all 3 rear plugs are in easy reach. Reassemble in reverse remembering to torque

Question about 2003 ES 300

1 Answer

...removing the intake manifold - any special extnsions to buy? thanks you do need to remove the upper intake plenum to replace the rear plugs. haven't found a easy way or special tool for the

Question about 2003 ES 300

1 Answer

...rear intake cam will line up with a mark on the front cylinder intake cam. The front intake cam also has a mark on it that will line up with the front exhaust cam. ...

...intake rear, exhaust 1,3 and exhaust 2,4. im assuming on a SOHC 4 cyl that there are 6 intake and 6 exhaust so do i order 3 of each type? so confusing please help! A normal sohc 4 cyl. has 4 intake ...

Question about 2002 X-Type

1 Answer

...intake plenum to incluke 8 bolts in middle the wire harness in rear and 2bolts 10 mm support bolts one on rear one by throttle body after that remove fuel line quick disconnect remove bolt under line ...

...rear of the intake manifold.***** you didn't tell me what motor you have so here are all of them on4.6L&6.0L its mounted in the front of the intake manifold behind the throttle body on the 5.7L ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...