Questions & Answers for: 550 cover removal Sewing Machines

Husqvarna Lily 530- dont know how to correct tension Hi, I have a Husqvarna Lily 530 and have lost the instruction manual. There seems to be something wrong with the tension but I am not sure how to ...

550. Needle hits a bottom plate. All thread and bobbin removed. Took the feed cover off. Do not see the problem. Possible bent or wrong needle. If ok, check the zig-zag mechanism to see if it has come

...550 not pulling bobbin thread. My wife has used the machine several times without issue, the last time she broke a needle sewing some denim, we found most of the needle but could not find it all, she ...

feed dog adjust Check they feed dogs are at least one mm above the needle plate. If not check their is no lint under the needle plate. To raise the feed dogs you remove the rear cover and turn a ...

...550 you need to do this first. Match the positions of the hook and the needle very closely. Turn the machine on its far side to see the bottom view. Remove the cover plate. Directly below the bobbin ...

...550 If it were my machine I would pull the back cover for better access to the rotating shaft and remove the remaining thread. If the thread works its way into the shaft bearings you will have a real ...

...cover of lily 550 thread stuck in one of tension disks? unable to pull it our Make sure the presser foot is in the up position. This will open up the tension disks. It takes a lot of patience to ...

...cover and the shuttle hook please help its a Empisal Celebrity 550 thankyou kindly H Lottering From the manual http://www.empisal.co.za/wp-content/uploads/2016/05/CELEBRITY-550.pdf Try the following ...