Questions & Answers for: McCulloch 50 1 gas

...50 parts gas, to one part (2) cycle oil. If you plan on leaving gas in the tank when not being used, I always recommend adding some gas stabilizer, such as Sta-bil, which makes starting the chain saw ...

...gas in? Fuel/Oil Mixture Use a quality 2 cycle oil and mix it to the OIL supplier's recommended ratio. Today I use Stihl 2 cycle oil mixed @ 50:1 in a Pioneer that I purchased new in 1980. There are ...

What is the proper gas to oil ration for my gas blower? it should be imprinted on the gas cap or near the cap,but normally 50:1 gas/ 2 cycle oil

you won't go wrong. Better to see a little blue smoke than blow a motor. However, most of these use to have a 50 to 1 mixture. That's 50 parts gas and 1 part oil. Otherwords, 500ml to 5 gallons of gas

WHAT KIND OF OIL DOES THIS USE? Chain oil ( non fling ) in the oil tank, and a 50-1 fuel oil mix in the fuel tank, only use good quaility two stroke oil designed to run at 50-1, preferably oil ...

...gas / oil mix is for my 2cycle water pump is. 50 to 1 - 25 to 1 - 16 to 1 ?????? thank you Gordon I've been unable to find this actual pump. Oil mix is usually 32:1 if you want to be on the safe ...

...finished, use all gas from reservoir to protect that carburetor (if you don't need chainsaw for long times). 50:1 is the current standard. I recommend Mobil super+ gas with STIHL HP Super oil

chain gas saw If you are looking for the gas/oil ratio, McCulloch recommends 50/1 gas/2cycle oil mixture.

...50, leaking gas out side of gas tank. Small hole on side looks like missing a plug? I don't know your particular saw, but all fuel tanks are vented. Possibly the vent line or vent fitting has become ...

...gas ratio 50:1 - 50 parts Gas to every 1 part oil. If you have to error one way or the other, it is better to error a little on the side of having more oil. Sears has a Craftsman chain saw 50cc that ...