Questions & Answers for: 4 wheel dr problems

Ad

Question about 2003 F150 Regular Cab

1 Answer

...wheel dr the front drive shaft turns but the front wheels wont, what could this be? if you look there is probably only one axle shaft turning also that shaft should not turn unless the wheels are ...

Ad

Question about 2000 Jimmy

2 Answers

wheel dr. (4Hi) the noise goes away, although you can still hear a hum like driving over a rough road. Do you know what this could be? Check drive shaft bearings , may be worn or broken. Good luck and

Ad

Question about 1995 Jimmy

1 Answer

...wheel dr. low but not like it should. Somtimes when I push the buttons to transfer from 2 wheel dr. into 4 wheel high and low, it takes some time to transfer. The forward works real good and ...

Question about 2001 Tacoma

1 Answer

wheel dr, 5 lug wheels; I want to lift 2-3 inchs...no lift kits seem to be available. Dave It would be best to only do a body lift kit if driving on the road.Suspension lift kits lead to a lot of tire

Question about 36" Wh3615 Walk Behind Mower Zero Turn

1 Answer

...pulls to the right how do i fix this The right wheel shaft may have slipped its pin, allowing the left wheel to provide more power. I had a similar problem with a DR Mower. Farmerbear at ...

Question about 36" Wh3615 Walk Behind Mower Zero Turn

1 Answer

4 wheel drive clicksig in right wheel, does not go into 4 wh dr Do You Have locking hubs on front axle, If so, That is probly where the problem lies. Good Luck

Question about 2002 Envoy

1 Answer

...dr swith There are a few things that would cause this problem.The first and most common would be the switch itself is bad. the next would be a bad 4wheel drive encoder motor, this is the motor on the ...

...wheel dr. Vehicle must be warmed up for 15 minutes before 4wheel dr. Engages. Summertime driving was no problem.no excessive when it does engage . Poss. Torque converter? Torque Converter has to do ...

...wheel dr iiivei If the steering wheel moves back and forth at 15-20MPH, the tires most likely have a slipped belt. The only way to diagnose which one is bad is to get a full size spare and put it in ...

...tacoma standard 4x4 is stuck in low axle 4 wheel dr. What is the problem? if it is a knob operation to change range , then check for vacuum hose missing of range actuator , actuator or linkage ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...