...belt around to almost half way) if not replace the tensioner pully. if good check the free pully by starting the car and spary a bit of wd40 on the center of the pully if noise disappers replace the ...
Question about 1996 Discovery
alternator will not charge when i cut my lights on also the belt makes a noise when i cut the lights on sounds like the diodes are blown,you can have it repaired or you can fit a recon unit
...Discovery. After a few minutes, it stops. Is this related to the Assister or Viscous fans? Is it normal..I'm a relatively new owner. - Thanks It could be the belts that are slipping on initial ...
Question about Duet GHW9150P Front Load Washer
...belt and pulley but now hear a clicking noise when it turns. Finally, the drum itself seems to be leaning and I can move it front to back. Is that normal as well. I am worried an absorber has failed ...
...belt cause a noise in the engine,if it is a grinding noise,the starter drive,may be sliding into the flywheel. Disco, I have responded to your request for comparing symptoms in the other thread you ...
...noise like "rotary winding" when engine is running. Have Changed the Compressor, Belt Tensor & pulley, Alternator, Air-cond compressor. The problem still occurred. The same noise still there. ...
why is my land rover 3oo tdi powerseering making a noise Is it a squeeling noise drive belt? Or it could be air in the system causing cavitation due to a leak
Question about 1998 Discovery
why does noisey belt sprayed with wd40 go away for awhile but noise comes back after sme time why a noisey belt should be changed not sprayed the spray acts as a lube and wears off
...BELT OF DISCOVERY 3 The best time to change the belt is before the old one breaks, the trouble is no one can accurately predict when that will happen but suggestions in the service literature, if ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions