Questions & Answers for: 36cc 16 chain saw

...chain saw oil does not come out on the chain This happens for two reasons. First of all, take off the chain and the bar and clean it all up as saw dust may be the culprit. The other reason is that ...

chain saw crank case oil Am cleaning piston and ring of chain saw motor, and need to know what kind and how much oil to put in crank case when reassembling NONE!!! there should never be any oil in a 2

I need the fuel mix ratio for a Craftsman 36cc Chainsaw please 40:1 Yes 40 to 1...BUT make sure your mix is right, better to be more on the oil side than low on it

chain turns but will not cut wood Chain is on backwards or very dull. The chain is probably dull , you need to sharpen it. In order to prevent it from going dull again you should always check that ...

...Blade I need the pitch for a craftman, 36cc, 18" chain saw blade. I purchased this saw from a friend and need to sharpen the blade. Go to a home improvement store and buy a new chain, they are

...chain saw model 358.352180.... I have a craftsman gas chain saw model 358.352180. It leaks oil from underneath the saw even when not in use. Make sure you drain the oil when storing your saw. That's ...

...16", 36cc try either of the links they should get you what you are looking for, http://lawnandgarden.manualsonline.com/manuals/mfg/sears/316350840.html ...

...saw-1997-2175-anniversity 18" -36cc-he replaced all fuel lines--now now working at all-do you have a diagram of the fuel routing or know where i can find one!!!!! thanks Try Husqvarna Genuine ...

...16" 36cc chain saw. Engine I have a craftsman 16" 36cc chain saw. Engine starts and runs fine . . . but the chain won't turn when I squeeze the throttle handle. Any ideas on how to unfreeze the ...

what is a muffler safety shut off on a chain saw? Never heard of a "muffler safety shut off". The chain brake handle sits above the muffler, could this be the safety part you are looking for?