Question about WRT54GX2 Wireless-G Broadband Router with SRX200 (LS-WRT54G2)
...button in a bit longer. Good Luck :D Hold the reset button in for a total of 90 seconds, the first 30 leave it plugged in, the second 30 unplug it then for the last 30 replug it it. Once it goes ...
...is a small/tiny button (red/black), this is the reset button. 2. Push and hold this button for 30 seconds(make sure the router is turned on). 3.After 30 seconds turn the router off and wait for ...
...back to default settings look for a little hole on the reverse, push a pin or paperclip in for 30 seconds or so. GOOGLE on the older linksys routers there is a small reset button in the back of ...
cannot reset to factory settings my linksys WRT120N I tryed with reset button 30 seconds but nothing change Turn the router off. Hold the RESET button in, for 30 seconds. Turn the router on, and see ...
...want to reset my linksys wireless N router, model WRT120N. I have tried holding the rest button for 30 seconds, then unplugging it for 30 seconds then holding it for 30 more seconds to no avail. Your ...
...I've troubleshooted all the methods shown on here, with power cycling, the hard reset, and the 30-30-30 reset. Http://192.168.1.1 is inaccessible. I believe under Manage Internet Connections in ...
Carlos, we have been doing the hard reset for a while already... more than 30 seconds... to no avail... still no blink and not yet resetted. Are you trying to do 30/30/30 reset?? THIS WILL RESET TO ...
...hard reset method: With the unit powered on, press and hold the reset button on back of unit for 30 seconds Without releasing the reset button, unplug the unit and hold reset for another 30
router just flashes its lights Press the reset button for 30 seconds. Once reset the lights will flash for 30 seconds. If still after that lights are falshing then you can contact linksys as there is ...
...leds on the router are malfunctioning and my pc cant connect to it. tried many cables and tried the 30-30-30 hard reset but it wont work... Should only need to hold the reset button for about 15 ...
Usually answered in minutes!
952 Questions
299 Questions
248 Questions
219 Questions
206 Questions
