Questions & Answers for: Chrysler Sebring lever switch

Ad

Question about 2004 Sebring

1 Answer

...lever, tilt the column down. Remove the two mounting screws on the switch and remove the switch. Remove the wiring from the hooks and disconnect the two electrical connections on the multi-function ...

Ad

Question about 2004 Sebring

1 Answer

switch they replace on my 2003 sebring convertible v6-2.7L VIN T FFV. after I had got it home that night I tried to turn on my fog lights and I keep trying, but could not pull the end of the lever out

Ad

...lever. This will turn on the fpg lamps. They will not come on without the headlights on. Once you have turned on the low beam lights by twisting the light switch on steering column, pull out (towards ...

Question about 2007 Sebring Sedan

1 Answer

...switch...If that checks out ok... take the trim ring off around the shifter. Carefully lift it by hand, it pulls off. Look thru the crack on the left of the shifter. There's a pink plastic lever with ...

...switch . If the starter will operate. the park gate position is correct. Move the shift lever into the neutral (NJ position. If the starter will operate in this position, the linkage is properly ...

just got a 2003 sebring convertable - where is the switch for the fog light and how do i program the garage door opener The fog lights are turned on by pulling the end of the directional lever out.

Question about 2003 Sebring

1 Answer

...and what color is it ? Need it for the brake shut off switch on a remote starter Trace it from the brake lever going from the pads up and you will see the brake switch and correspondingly the

Question about 2007 Sebring Sedan

1 Answer

...lever unlocked while you push and release the switches with your finger. Depress the brake pedal to get it out of the way. Remember to set the park brake first. Could just be a bad switch or loose ...

Question about 2007 Sebring Sedan

1 Answer

get it out of the way. Remember to set the park brake first. Could just be a bad switch or loose connector. Check fuses and the bulbs. Is shifter fully in Park? Also try jiggling the turn signal lever

Question about 2002 Sebring

1 Answer

lever, and hazard switch protrude from you will see two deeping drilled holes, at the bottom of each you will see a Phillips head screw. Remove these two screws, and pull the two plastic pieces apart.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...