Questions & Answers for: 2006 pontiac sv6 rear brakes

brakes The rear caliper piston turns inward,by pushing,and turning the piston at the same time.One side goes left,and the other side,turn right.Go in as far as it will go.Be sure to line the piston up

2006 Pontiac Montana SV6 I'm trying to change the front brake pads on my 2006 Pontiac Montana SV6 and I can't compress the caliper. Do I need to twist the caliper piston while squeezing it? no that is

Replacing the rear brake pads, piston will not compress. Any suggestions? Hello this is what you will need most auto part stores carry these $10 to $20.00 you will use a 3/8 drive ratchet to operate ...

...rear brake pads on 2006 Montana & there not enough clearance for new brake pads to fit on drum pads go over a rotor, you can buy a tool to spread the pads meaning pushing the caliper piston back. ...

2006 Pontiac Montana started displaying a light rattle in the undercarriage about a year ago when going over large bumps and washboards. Nobody could find a problem - I even had an auto mechanic doing

...you know that you have to compress the integrated parking brake on the caliper by pushing and turning in clockwise with a special tool,

2006 Pontiac Montana sv6 brake pedal when running. New master cylinder, both rear calipers, rotors and pads, Right Front speed sensor wiring connections, no ABS or traction lights on. Bled master ...