...brake pads and rotors. Pontiac Montana 2002 not a FWD. I'm not 100% sure but I also believe I can feel a vibration on steering wheel coming from front. 1. Have the caliper checked if the retaining ...
...brake pads line up to fit in the notches on the pads.You can purchase the tool to do this at a auto parts store.Hopefully this helped you. Hi there, Some have to be turned in and not pressed. Best ...
...2006 montana sv6 what to do with the shims that were included with the pads? Dear Stray Shims.........these shims that came along with the new brake pads are designed to be installed on the non ...
Question about 2005 Montana SV6
2006 Pontiac Montana SV6 I'm trying to change the front brake pads on my 2006 Pontiac Montana SV6 and I can't compress the caliper. Do I need to twist the caliper piston while squeezing it? no that is
...brake pads, piston will not compress. Any suggestions? Hello this is what you will need most auto part stores carry these $10 to $20.00 you will use a 3/8 drive ratchet to operate this tool your ...
...2006 Montana & there not enough clearance for new brake pads to fit on drum pads go over a rotor, you can buy a tool to spread the pads meaning pushing the caliper piston back. if the rotor is ...
Question about 2005 Montana SV6
...you know that you have to compress the integrated parking brake on the caliper by pushing and turning in clockwise with a special tool,
Question about 2005 Montana SV6
2006 Pontiac Montana SV6 - electrically de-activated although battery fully charged. Vehicle completely deactivated. battery fine - fully charged, but no response to key fobs, no dash or external ...
2006 Pontiac Montana sv6 brake pedal when running. New master cylinder, both rear calipers, rotors and pads, Right Front speed sensor wiring connections, no ABS or traction lights on. Bled master ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions