Questions & Answers for: 2005 caravan door lock wiring

Question about 2005 Caravan

1 Answer

Where can I get access to wiring diagrams for a 2006 Dodge Caravan? door locks will not work manualy or remotely. back lid works with remote and all lights turn on and off when using remote.

Ad

Question about 2005 Caravan

1 Answer

...2005 caravan what are the wires for in the track of the slide door Hi my name is Allen! Those wires are called track wiring and it depends what options you have, if you have power sliding doors, they ...

Ad

...door lock switch stopped working remote button will lock doors but not openthem Does the central locking work when operated manually by the key or by the inside button? If it does not then the most ...

Question about 2005 Caravan

1 Answer

power locks not working, how do you fix problem? Start with fuses, does the RKE work, possble BCM is locked up, this is a mux wire system, is there a remote stater in this van, they cause mux wire ...

...door locks will no longer work on my 2005 town and country disconnect the battery for 5 minutes and reconnect. sounds like the BCM is froze. it is common for the caravans 2001-2005 this trick usualy ...

2005 Dodge Caravan. The Automatic door locks are not working. I replaced the fuse and they are still not working. What do I do now. You may have a broken wire & it usually breaks at the flex point

Question about 2005 Caravan

1 Answer

need wiring diagram for 2005 dodge caravan sxt model door locks will not lock This is with Remote Keyless Entry System...I have one without keyless entry also....

lock brakes stays on and the electric door locks stop working. Antilock light most likely is a wheel sensor and/or the wires to them. One on each wheel. The door locks go thru the body control module.

can lockout from doors but alarm doesn work and the sliden doors locks doesnt open u have to do it manually,if you press the panic botton it sound but if you open any door it doesnt alarm and power ...

2005 dodge caravan both rear door does not unlock... Unplug connector to lock actuator and use meter to check for power and ground toggle as you use the door lock button. If you see power and ground ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...