Questions & Answers for: 2004 yukon drivers side actuator

2004 Yukon liftgate fuse error code "Replace liftgate fuse" code on console of 2004 GMC Yukon. Liftgate will not lock. Replace the ECC 10ma fuse on the driver's side fuse panel. This happens to me ...

...side air blend door actuator on a 2003 Yukon? I believe this might be my problem...SOMETIMES the air blowing out of the driver's side vents is hot. By shutting the truck off and restarting it, the ...

2004 Yukon. driver side air conditioner not working 2004 Yukon. driver side air conditioner will alternate hot and cold air through the vents -driver side thermostat will not control temperature. ...

2004 GMC Yukon blows hot air out of the driver side vents when the AC is on. Cold air come out of the passenger side. Probably the left temp actuator. The wires in the right I/P junction block could ...

...2004 gmc Yukon with dual climate control. I have had this problem. I am not a mechanic...so to correct the issue temporarily, I simply turn off the car and restart. This has worked everytime for me. ...

side is blowing cold air is this a control sensor or a temp. sensor that could cause this problem manual temp control? or auto temp, its either out of calibration or the blend door actuator or door is

2004 yukon ac blows hot air on drivers side with 2004 yukon ac blows hot air on drivers side even if the control on that side is turned down EASY FIX-- your blend door actuator has a grease drip ...

...drivers side. When you select a temperature setting with the dash controls these actuators move the air temperature control doors to match your settings and give the controler feedback on what their ...

2004 Yukon, air whether it's AC, heat or just vent doesn't go where the mode says it should. Mostly comes out the defrost ports on the dash. This is for both the driver, passenger and rear seat ...

...Yukon. The climate controller works fine, the driver side actuator (mode actuator?) and the actuator on the lower, passenger side, attached to the blower motor (blend door actuator?) works fine as I ...