Questions & Answers for: 2001 prelude

Question about 2001 Prelude

2 Answers

...prelude my 2001 honda prelude engine light came and the code number is 5416 and it also says emission system probably need tunup 02 ensor most likely. Under the car connected to exhaust towards

Ad

Question about 2001 Prelude

1 Answer

2001 Prelude brake light (dash) always stays on...I don't even use the e-brake! Sometimes it will go away after I brake, but just to reappear shortly after for no apparent reason...I don't know if you

Ad

...to know if a newer motor would fit in my 86 honda prelude newer like a 92or a 2001 motor Best way is to call a salvage yard and ask how new a motor you can use. Just tell them your looking for

Question about 2001 Prelude

1 Answer

2001 Honda Prelude Hood Pull Cord I have a 2001 Honda Prelude and the pull cord for the hood seem to have come loose while the hood was closed. How can i open the hood when it is closed completely so ...

...2001 honda prelude has a red maintenance required light on. Has approx 80K miles. Any ideas? The red maintenance light on the 5th generation preludes is simply an oil light. Press your key in the ...

2001 Prelude hazard lights come on while driving my hazard lights come on while driving and i cannot turn them off, they stop flashing after a minute. i think it has something to do with the ...

can i just switch my ignition from a part out car on 2001 prelude with no key call a parts store and ask them for the part number for a 1998 and a 2001 assuming they are the same part number then YES

Question about 2001 Prelude

1 Answer

...2001 Honda Prelude. ?? if you've corrected the problem associated with the code being thrown, it can either clear itself, or, you can unhook the negative battery cable for 10 minutes, sometimes ...

Question about 2001 Prelude

1 Answer

speedometer repair odometer Speedometer works, but the odometer does not work on my 2001 Prelude. how do I fix this? replace the dash !!

...2001 honda prelude The lens either has a small tab that you release it with or there are screws. It this is on the interior then the finishing cover just snaps on. Use something not metallic if you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...