Questions & Answers for: 2001 buick lesabre heater hose

...the AC/heater system of a 2001 Buick LeSabre? I want to see where the blend doors are located. Blend doors are in the heater and A/C box, typically not a job for non professional, very very ...

...heater hoses and follow them to the firewall. One of them will have a valve unit, controled by vacuume. Insure the vacuume hose is connected not cracked or broken. If not the unit itself may need to ...

buick lesabre custom The hoses are moved by turning them a few degree's, then pulling them off. See diagram below. For 2002 Buick Lesabre 3.8L SFI OHV 6cyl check this procedure to work with the Heater

...heater core on a 97 buick le sabre Ok to eliminate having heat in your vehicle and/or replacing a damaged heater core unhook both the 5/8" id hoses going to your heater core then remove them and ...

...heater hose is hot. The 3/4 one is hot heater control valve or flush the heater core(possibly clogged) OK, if Both Heater Hoses are not hot, then the heater core is likely to be plugged up and it is ...

heater hose fittings i cant get it back on is there a trick to it Wet the inside of the hose where it pushes on. Use some coolant or even a little saliva (spit). Make sure the hose clamp is loose ...

...buick lesabre with a 3800? do i have to remove anything to get the new part in? You will have to remove the alternator and belt tensioner. then remove the remove the alt bracket the fitting is ...

heater doesnt work If the radiator is full of coolant, and the heater hoses are getting hot, you may have a problem with one of the blend doors under the dash. The blend doors direct air thru the ...

...heater hose fitting passenger side Heater hose fitting? You mean the nipple that comes out of the heater core, that the hose fits onto? You have to replace the whole heater core. I know that I lot of ...

...Buick Lesabre should I also replace the plastic elbow hose connectors A friend bought this car and someone bypassed the heater core and just put a small "u" shaped piece of hose into the inlet and ...