Questions & Answers for: 2000 ford focus vacuum hose

Question about 2003 Focus

1 Answer

ford focus, 2000 zx3 code p0455 I've got a ford focus, 2000 zx3 2.0 zetec engine. I keep getting a P0455 code. I changes the gas cap. The code returned a couple days later. Any ideas on where to look ...

Ad

...2000 ford focus DOHC when you stop it I have a 2000 ford focus DOHC when you stop it stalls.at red lights I think this is all due to your vacuum leak. Look for a hose not connected to the throttle ...

Ad

...ford focus starts then starts to die then backfires Sounds like a vacuum leak. Vacuum leaks can cause backfires. Check all your vacuum hoses, some of these can appear to be connected, but can have a ...

...2000 ford focus n at everystop sign or red light it stalls n feels like its going to die.what would be the problem? front of engine right side top behind manifold check the rubber breather hoses they ...

ford focus idles rough will stall. Ijust resently changed the timming belt. I also replased a portion of the pcv hose that came from the trotttle body, because it was crushed. I have changed the spark

...2000 Ford Focus but don't know where it's located. Follow the upper radiator hose from radiator to the engine where it connects to the engine thermostat will sit under that housing held on by two ...

Question about 2000 Focus

1 Answer

I need a vacuum hose diagram for the 2000 Ford Focus 4 door Lx model. Thank you The vacuum hose diagram is under the hood usually on the radiator shroud. of fender well.

Question about 2000 Focus

2 Answers

...2000 focus SPI Vacuum Diagram Zetec Vacuum Diagram SPI Vacuum Diagram Zetec Vacuum Diagram Zetec Vacuum Diagram If it's equipped with the 2.0L SPI engine (eighth digit of the VIN is 'P'), the most ...

Question about 2000 Focus

1 Answer

2000 ford focus was collapsed.then the one to the pcv valve did the same changed it and still got a rough idle Sounds like there are more vacuum leaks elsewhere. If some of the hoses are rotting, then

Question about 2000 Focus

2 Answers

...2000 ford focus i would clean the MAF. also check the PVC hose they can become week and colaps. P0171 is a lean condition (too much air) in the engine. Most likely causes are a vacuum leak, ie pcv ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...