rear near side, garage supposedly changed the wheel bearing, no joy. Replaced tyres at garage advice, still no joy. did they check the other wheel bearings? some time a wheel bearing noise will travel
Ford Focus 2000 Changed wheel cylinder and shoes on rear of Ford Focus 2000 Td di estate (Ghia) 1800 cc. Need to know torque setting for rear wheel bearings. Can only find out that the hub needs to be
torque setting What is the torque setting for the rear wheel hub nut on a ford focus V reg car 173 ft lb
Question about 2000 Focus
what is the final torque on cv axle after replacing wheel bearing what is the torque on the cv axle after replacing wheel bearing on a 2000 ford focus (press in bearing) 214 ft. lbs. 217 ft.lbs.
...is the abs ring on the ford focus rear drums????? does it look like an oil seal on the on the bearing The ABS reluctor is built into the rear wheel bearing assembly, and it must be replaced as a
...2000 ford focus? Hi, The nut can be reused 4 times before renewal is required. The tightening torque is 235 Nm. If possible rotate the assembly in the opposite direction to tighten direction whilst ...
1999 ford focus rear wheel bearing torque setting replaced wheel bearing do not know the torque setting, could you please help. WHEEL BEARING LARGE HUB NUT TORQUE 232 FT LBS. 177 ft lbs
...ford focus. it takes a 30mm socket. The torque setting 49 ft. lbs. Torque Specifications DescriptionNmlb-ftlb-in Wheel nuts - steel/alloy wheels12894- Wheel spindle retaining nuts6649- Wheel cylinder ...
...2000 Ford focus. I removed the spindle nut, 2000 Ford Focus Drum Removal ProcedureIf removing the drum to service the rear brakes: (note, do not remove hub retaining nut for this procedure) 1. Raise ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions