Questions & Answers for: 2000 chevy silverado brake line

...after new ones are put in on a 2000 chevy silverado the easiest way is to open all the bleeders and let gravity do the work for you or you can do it one wheel at a time and bleed them ...

Ad

...Chevy Silverado... ABS EBCM diagram help??? Brake line hookups 00 Chevy Silverado... ABS EBCM i had to replace some brake lines and i am unsure if i reconnected them back to there proper spot on the ...

Ad

Question about 2000 Silverado 1500

1 Answer

...Chevy Silverado and recently replaced the rear brake line due to blown rusty one but i had to remove all brake lines going to the EHCU due to the transfercase and tortion bars in the way to get to ...

...2000 chevy silverado I read this same problem all the time, the reason u can't bleed the lines is that a special tool is required that pluge into the ABS and holds the hydraulic valves in the ABS ...

Question about 2000 Silverado 1500

1 Answer

...2000 chevy silverado 4.8 l The caliper guide pins will usually have either a 3/8 inch or a 5/16 inch allen head bolt. If the brake calipers are found to have phenolic pistons then it would be ...

Question about 2000 Silverado 1500

1 Answer

...2000 chevy 1500 silverado 2wd. Are the bolts on the rear reverse threads or are they normal. And what size are they. The bolts should be what you call,normal. What bolts,the wheel studs,same as the ...

...2000 chevy silverado, the front left brakes keep getting stuck and i just change caliper for the second time so i know its not that. after locking up it releases about 45 min to 1 hr, i just put new ...

the brake lines from my 2000 chevy silverado You need a special tool to bleed the brakes due to the Anti Lock brake system. You will need to see the dealer on this or a well equipped brake repair shop

Brake lights don't work on my 2000 Chevy Silverado I changed bulbs and fuses, but they still wont work 2000 Chevy Silverado 1500 Check the switch that is under the dash on the brake pedal arm.

...Chevy Silverado brake caliper not releasing. 2001 Chevy Silverado. the driver side brakes were squealing. The rotor was chewed up. Replaced the caliper, break line, rotor, new pads, heat shield and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...