brake pedal switch, mine was to close to coming on all the time and would flash the light on bumps not allowing the cruise to engage untill I bent the little tab to hit the microswitch sooner and stay
2000 530d ABS and ASC warning lights stay on Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would
...2000 model engine # CHasis AW06103, i just got a light of ASC and ABS, could u please help what is the fault and will it effect engine or gear Check to see if your brake pads and rotors are in good ...
2000 323 bmw brake lights stay on hi, under the dash where the brake pedal is look up to the top of the brake pedal you should see a black switch with a small white plunger type thing, check the ...
2000 740il. I haven't driven or started the car in a week and when I did, the ABS, BRAKE and DSC light all stayed on. What could be the cause of this? a bad wheel sensor could be the culprit. as far ...
2000 323 bmw brake lights stay on Check for a shorted brake light switch. The switch is under the drivers lower trim cover. It is an adjustable switch.
...light stay's on, what can i check first in steps. Thanks Make sure you have enough brake fluid, make sure all 4 tires are the same size. You can check the output voltage (DC voltage agenerators) of ...
the brake light on the dash stays on POSSIBLE AIR IN THE LINES POSSIBLE BROKEN BRAKE LINES OR LINE BRAKE PADS COULD BE WORN TO METAL EMERGENCY BRAKE LEVER OR PETAL OUT OF ADJUSTMENT
Question about 2000 Z3
...2000 BMW z3 that the brake light doesn't turn off while running. I've removed the wire off the switch but still on. The right hand signal flashes fast when lights are on. Usually if my right blinker ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions