Questions & Answers for: Ford Escort 1 6 crank pulley

...crank pulley just to the back of the pulley and go around the pulley you should find the sensor mounted on a bracket. You should see what appears as a sprocket with widely spaced teeth on the engine ...

pulley, bolts and belt, put everything back together but now it won't start. Hooked a battery charger up to it all night, didn't help, tried to jump it with another car, still didn't help. We are just

...Pulley and Crank Pulley. TDC is with both in 12 of the clock position, aligned with the Markers. Take care when releasing the tensioner, that these positions have not been disturbed during ...

...to pull the gear off the bottom of the crank shaft right before it goes into the block. That is attached to the crankshaft pulley. The bolt has to be removed then gently pry the pulley off the

...work in a zx2 model? yes Yes and no. It will bolt right up, but the Zetec Crank Trigger is in the bellhousing, where as the SPI 2.0 Crank Trigger is on the crank pulley, on the front of the

I need to no the crank pully tork speik I need to no the crank pulley tore speck CRANKSHAFT PULLEY BOLT TORQUE IS 81 TO 96 FT LBS

crank pulley in order to have acces to the sensor you ne to remove the pulley first. Note when the crank sensor is bad there should be no fire at your sparks. before keep spending more money dont know

...start. please help.. idler pulley siezed when hot. on the way off, the belt took out some wiring the crank sensor is located on crank pulley. When the belt came off it could have broke it or the

crank shaft postion sensor off and forgot to plug it back in now it starts and does not shut off but there is a rattling under the hood. HELP! Rattling is most likely the original problem. I would say

...Crank Pulley (damper) hasn't worn & moved in or out. I personally have seen alot of tough belt issues, that in some cases took years to figure out,but never a belt that came off ,other than ...