Questions & Answers for: 1998 ford ranger 3 spark

1998 ford ranger number four spark plug misfiring. code P0304 I have a reacquiring miss firing problem with my 1998 4.0 Ranger. Is there some problem that may be causing this? OBD II code reads P0304 ...

what size gap does a 1998 ford ranger spark plug need to be? 4.0L = 0.052-0.056 3.0L = 0.052-0.056 2.5L = 0.042-0.046 .044. It is listed under the hood in front of radiator next to vacuum chart.

...Ford Ranger 3 liter. I just changed I have a 2003 Ford Ranger 3 liter. I just changed the Spark Plugs and Fire Wires, did the gapping on all six Spark Plugs, but now when I drive it, it feels like ...

what is the spark plug gap setting for a 1998, 4 cylinder Ford Ranger it realy wont bother the car to much what you set it at but go for a gap of 18 to 25 th of an inch

...Ford Ranger 3.0? When purchasing the plugs I was informed it was .44. but I am getting a slight back fire when engine is running. 0.042-0.046 is the correct gap for your spark plugs,If it is ...

Can you tell me the spark plug gap for 1998 ford ranger 6 cylender 4.0 .054 (In thousandths of an inch)

spark plug gap ford ranger4x4ext4.0 1998 ford ranger 4.0 ext 4x4 sparkplug gap and ingnition wire location do you mean spark plug wires and gap should be on a sticker under the hood

1998 ford ranger 4x4 4.0 six cylinder engine Gap needed for spark plugs on ford ranger 1998 4x4 4.0 engine plug gap should be .045". if you look under the hood somewhere you might still have the decal

...Ford Ranger 4.0. Where does the spark plug gap on it? It depends on the spark plugs that have been used. Some are pre gapped, some have three preset side electrodes around the edge. Gapping spark ...

...plug gap for your 1998 Ford Ranger 2.5L with 8 plugs depends on the specific spark plugs you're using. Here are some recommended gap values: Champion RC8PCY: Gap of 0.8mm. NGK PFR6B-II: Gap of