Questions & Answers for: 1998 discovery starting

Question about 1997 Discovery

1 Answer

1998 land rover discovery. Fuel pump recently replaced, but now pump does not shut off after 5 sec when it should when engine is started. any suggestions? The fuel pump must run constantly while the ...

Ad

...1998 landrover discovery will not start but the battery is good. when you turn the key it makes a clicking noise. I want to change the starter but am making sure it is the starter and how could you ...

Ad

Question about 1998 Discovery

1 Answer

...land rover starter tools i will need to take off a starter for a 1998 landrover discovery go to any autozone store. they will loan you the tools u need, and show u exactly how to remove the

Question about 1998 Discovery

1 Answer

starting problems i have a 99 discovery II winter cold killed my battery after recharging it still does not start when key is fully turned i hear a one click then nothing happens need new battery the ...

98 landrover discovery will not start. It just spins does it have fuel pressure? to find this out get a can of spray starter fluid from a auto parts store, spray it into the engine air intake, if the ...

...discovery is started having problems with warm starting a few days ago. It misfires a few times and will not start. If i wait 10 to 15 minutes it starts right up. Now it will not start at all my ...

replace steering column lock & ignition land rover discovery mk1 whats the best way to remove the shear bolts. use a dot punch and hammer and try, by hitting the sheared head part of the bolt, to ...

When I try and start my Land rover discovery it just makes a squeeling noise and wont start help!!!!!! either low battery voltage,or the battery cables need to be cleaned,and battery post.

1998 land rover wont start .It is not getting and fire to the fuel pump. I had the same problem with my 98 discovery ..on mine the stering is on the left side ....on the right side under the glove box

1998 land rover discovery may have loose or broken flex plate. How to tell? excessive noise from lower bellhousing. remove four torque converter bolts and start and run motor....if noise change then ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...