Questions & Answers for: 1992 nissan alternator fuse

ALTERNATOR AND BATTERY ON. STILL WON'T START, DASH LIGHTS, AND HEATER WON'T WORK. ck the main fuses under hood the main fuses close to the batterie 80 amps and 100 amp ratings replace them also ck the

1992 Nissan Pathfinder charging problems My Nissan Pathfinder is frying alternators. Tested the battery it is good, checked all wires, fuses, etc.. all good, but I have replaced the alternator twice. ...

nissan maxima doesn't work. I checked the fuse and bulb. Everything is fine. Also the battery get drain. I had to change the battery. Now I am disconnecting the battery when the car is not running. Is

Alternator problem? 1992 maxima gxe - Okay I was travelling a distance of 750 kms and on my last hour, was driving a bit fast (past spedo limit) just to get a rush then as driving for at 160-180 kms ...

no accessories working, but engine turns on and drives new battery and alt.put in by son in law after started having charging problems. got it back finished up the putting back together. it starts and

1992 Diesel Nissan Serena van, having problem with the battery charging. Heard a shorting sound from behind Glovebox, this made warrning lights flash, after a while my car died. it can be push/ jumped

...1992 Nissan pickup with a brand new battery & a tested good starter. What could be draining my battery? The way I track down battery drains is by disonnecting the negative battery cable and ...

...1992 Nissan Maxima Hi, the voltage should be at least 14 at the battery with engine running. If the voltage is higher at the alternator, the charge wire or fuse is bad. If the voltage is good at the ...

fuse box The click you are hearing is a relay. The cause can be that the battery is not fully charged allowing the car not to start. Try getting a jump start and the car should be fine. After the jump

...Nissan Maxima battery light on and brake light turns on then off. Checked the batt voltage with a dmm, had 12.8v engine off and 11.8v engine running. Batt also had a pos post to case reading of 4v. I ...