...Chevy S-10 4.3 No spark It was running fine, went into a store for about 40 minutes, came out and it would crank just fine, but not fire. I came back 3 hours later and it started right up. Ran it ...
...chevy truck, no spray from injectors new fuel pump installed earlier. still runs great. plenty of gas up to the throttle body (disconnected the fuel line to see). installed new ignition module, new ...
1988 chevy cavalier z24 6c 2.8 liter,okay it has been giving me hell latley cant figure out why,it started as i was driving it and it started lugging like it wasnt getting any gas and back firing then
...chevy expert, but if it goes into Failure Mode Strategy, that is difficult to diagnose, but usually an easy fix when you find it. The engine module very seldom is the cause. here is what Ford book ...
...chevy suburban Chain Print REMOVAL & INSTALLATION4.3L, 5.0L, 5.7L and 7.4L Engines See Figures 1, 2, 3, 4, 5 and 6 Remove the timing cover. This will allow access to the timing chain. Crank the ...
Chevy Equinox. Over the years, GM has saved a bundle on manufacturing the 3.1L engine by using the production line tooling it originally developed for the 2.8L V6. By simply changing the bore diameter
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions