There is 2 problems that makes this tv have standby fault.. so here they are,!
1.)main av board ---the 8 leg eeprom loses programing just under LVD CABLE TO SCREEN -£14.99 from a guy or if you can program yourself 4.99 for the flash to reprogram,.
2.)POWER SUPPLY FAULT IS MLT199TL PSU. (UA4)AREA, SG3525AN (16 leg) Regulating pulse width modulator.
the first fault all votage at psu will be there ,, 5v / 12v / 24v
the second fault psu will have 5v standby but no 12v or 24v this will stop the secondary from fireing up.. hope this helps.
sorry here is the website for NEW FLASH..!
http://www.television-magazine-forum.co....
×
537 views
Usually answered in minutes!
thanks you engineer1
i have fitted the eeprom and the tv fired up but no sound no tuning of any chanel. i am going to send back the ic for testing. i will let you know what happen.
sorry for my late reply. my main board for the baird j047baird is cv109hv2.0 the eeprom not compatable for this board so it did not work all feature. now iam left in limbo.
×