Is there a way to remove barbie jammin jeep wheels without breaking the parts holding the wheels on?

If the wheels are bowed out it is usually caused by the steering linkage being damaged. Power Wheels vehicles have a long metal bar that runs between the two front wheels on the vehicle, on either end of the long bar is a plastic bracket. The bracket is riveted to the long bar and sometimes that can become loose or bent.
Remove the battery and flip the vehicle over, inspect the linkage and also the front axles to see if they are bent or damaged. If any parts are they need to be replaced, also make sure the tires themselves are not damaged.
Here is a link to the parts you will need for the repair.
Linkage: http://www.mendingshed.com/powsteerlin7.html
Tire: http://www.mendingshed.com/jeepb7659.html
Front Axle: http://www.mendingshed.com/b7659axle.html
Axle Cap: http://www.mendingshed.com/noname4.html
Let us know if you have any questions.

some people stud the tires with screws, or rubber traction bands can be purchased, or just put rubber bands on the tires for indoor use

alot of the parts are held on with screws from underneath, i can get you the assembly manual and you could follow that in reverse order to disassemble it

you need a new gear box

those are the traction bands, they go around the wheels, there should be four of them

they are the traction bands

In the hood of the jeep there is the battery. The jeep should of came with a plug-in quick charger that fits in a general outlet. Simply unplug the battery, and plug it into your wall in the house, etc.

Where does it go on my Jeep it only goes in reverse it’s brand new

I know you are technically strong to do the bypassing part. But assumption is to do with fuse.

Your Power Wheels® 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is
a self-resetting safety device which automatically "trips" and shuts down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once a fuse has "tripped", remove your foot from the pedal and wait approximately 25 seconds before operating the vehicle again. To avoid repeated automatic shut-downs, avoid severe driving conditions.

better call up Fisher price, and lay back with free mind.

Here is the link to the manual:

http://service.mattel.com/us/product_detail.asp?id=T8396&Ntt=T8396&Pn=1&Brand=Power+Wheels&Cat=Power+Wheels+Advanced+Series