How to switch off the green and red LED ?

Hi Jimbo, generally this issue is from defective LED lamps, the inverter is shutting down because of over current because of shorted LED's. All the main board knows (the board that issues the error codes) is the inverter shut down, it has no way of knowing why.

Annoying! happens to us too frequently, but this works. We ended up buying a new one and returning our broken one after owning for three months From Manual:) 5. Turn on the Nursery Unit using the On/Off switch on the side. The green power light should come on. 6. Within a few seconds, the Parent Unit will lock on to the Nursery Unit and the top four (4) green LEDs will shut off. A second later, you will hear a series of beeps and the connection LED should change from red to green. Your monitor is now ready for use. 7. If the top four (4) LEDs do not shut off, power off the Parent Unit and the Nursery Unit and repeat steps 4 and 5 above. 8. If the connection LED on the Parent Unit does not change from red to green and the unit begins to beep, press the channel "ch" button on the Nursery Unit. Within a few seconds, the Parent Unit should lock in on the Nursery Unit and the connection LED should change from red to green. You may hear an audible beep during this process. 9. If the Parent Unit is still unable to lock in on the Nursery Unit (connection LED will be red and the unit will beep), power down both the Parent Unit and the Nursery Unit. Wait for 10 seconds then hold the volume down button on the Parent Unit while pressing the On/Off switch. When the unit powers up, you will hear a single beep and all of the soundlights will illuminate. Release the volume down switch and within 2 seconds you will hear two beeps and all of the Sound Light LEDs will stay lit and the bottom LED will be red. 10. Repeat steps 5

i bought new phone today it balckberry 8120 pearl and i cant turn it on i recharge the battery like 5 hour and all i can see is a flesh red light that al

MY PHONE ONLY DISPLAYS A WHITS SCREEN AND A PICTURE OF A BATTERY WITH A RED LINE CROSSED THROUGH IT WHAT DOES THIS MEAN DO I NEED A NEW BATTERY OR ? HOW DO I RESET MY PHONE ?

This just means that the phone has coverage. under options and then screen/keyboard, you cna turn it off by where it says LED coverage indicator.

even m going through the same problem and m not geting what to do please guys help as fast as possible

yes but you have to open the tv

ballast is not striking the lamp and needs replacing

this is a symptom of a bad lamp. for some reason it won't spit out a lamp error. shaking up the lamp will sometimes fix temporarily but you will find replacing to be the answer. if your tv has a fan error, you will get 4 red blinks.

Problem: Samsung LTM1755B with only a blinking yellow LED when you try to turn it on.

Solution: I just had one of these come in. I opened it up, and found the U501 capacitor a little suspicious looking, in that it had a deformed top. It was a 470uF 16V electrolytic 105degC 10mm x 12mm. I replaced it with a very good quality 1000uF 16V electrolytic 105degC 10mm x 16mm Nichicon UHN1C102MPD. After that repair, when I tried to turn it on, the LED was yellow for a second, then green, then I got a picture, and it appeared to work great. I then asked the owner a week later how it was working, and they said it was working just like new!