We had power outage yesterday and now our office phones need re-programmed. We have Prostar 816. Since the power came back on, only one phone is ringing and the held calls are ringing back within a few seconds. We also cannot pick up phone to answer, we have to hit line that's ringing. How do we restore settings to the way they were? We had power outage yesterday and now our office phones need re-programmed. We have Prostar 816. Since the power came back on, only one phone is ringing and the held calls are ringing back within a few seconds. We also cannot pick up phone to answer, we have to hit line that's ringing. How do we restore settings to the way they were?
To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
The code for hold recall is #52
enter in your hold recall time in sec. and in a 3 digit format. i.e. 30 seconds = 030 a minute and a half is 090 and so on.
press # when finished
it sounds like the memory battery on the main board is no longer working which means that it'll happen again.
646 views
Usually answered in minutes!
We have the same problem
just need manual
×