Why my stove get the code f2E0? all ready unpluget for 6 min. and appears the ? sign.

Hi,maybe if you have not tried it already,maybe switch it off at the mains and swich it back on it may reset its self,hope it works for you.

F2E0 is shorted key pad. You will need to replace keypad if the power shut down and reset does not work.

Your electronic range control clock has gone out on this unit. You can contact us at accurate-appliance-service.com for all your parts. We can get the correct part out to you right away.

We hope this answers your question and the best of luck to you.

Get a heat gun or hair dryer or extremely hot wet rag and warm the buttons . kill the power and retry

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Turn off the breaker and wait for 5 minutes. the follow this 3 steps:
--> After turn the breaker back on, go to the range and press "OFF", "OFF", "START", then click on the "clock set", there is a message on the display saying that do you want to delete the error, at this time press on the "START" again. And wait for a while until the everything on the screen disappear except the clock time. Hope this will fix yours. It fixed mine.

F2-EO indicatwes a shorted key pad. Electronic parts on ranges sometimes have warranty for five years (may only cover parts) so check your owners manual to see what your warranty is then call for service. It is a good idea to save reciepts of repair for future reference if neccessary.

"cycle the circuit breakers" is to turn the switch for the stove at the electric switch box at the main feed of the house electric panel. This is equivalent to unplugging the stove and plugging it back in.

In the old days, a circuit breaker was a "fuse" in the "fuse box"...

It appear that Bosch stoves are sensitive to the orientation of the hot and neutral. Mine was reversed at the outlet. I changed it to be correct and it fixed the problem

I have the same problem...stuck key err F2E0
Can any one please tell me where is the sensor? I mean which part of the oven have sensor, is it inside or under the button control panel?