I want to know how to install it back to my computer please

Hi.

Could you please let me know the Operating System installed in the Computer?

Once you let me know the Operating System installed in the Computer, I can provide you the detailed steps to perform the Backup on the USB Flash Drive.

Please feel free to contact for further assistance.

Thank you,

Suresh

What is the maker and model of your printer?

Can you locate the back-up file folder? Or does the back-up folder now seem to be missing?

Please clarify, What is the Operating System installed on the computer? The password reset or recovery depends on the operating system installed. Please let me know, whether it's windows xp or windows vista or windows 7. Windows xp's password reset method will be the easiest, while windows vista's and windows 7's are more or less similar, only with different tools.

Thanks and awaiting.

Hi rudymolina57,

I understand that you have already tried installing several Audio Drivers from Internet. However, please try installing the appropriate one from the links below. If you have already tried installing this, please post back with the correct version of the Operating System installed in the Computer.

You can download the Drivers from the below link. Please select the correct Operating System.

Windows XP

http://cdgenp01.csd.toshiba.com/content/support/downloads/sa100audiox.exe

Windows Vista

http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_audio_realtek_25652A.exe

Please restart the Computer after installing the Drivers for the settings to take the effect. Also please try increasing and decreasing the volume to check if that work.

Good Luck!

Please feel free to post back if you require further assistance.

Thanks for using FixYa.

When you plug it into the computer, Does the Computer recognize it, and if yes, what does the computer recognize it as..?? How old is it? When/where did you buy it? if on ebay... Give me the EBAY item number...if not please post a picture of the actual webcam (closeups front, and back)

If the computer does not recognize the WEB CAM when you plug it in... then most likely the webcam in busted.../too old.. These webcams are not so cheap it may not be worth the hassle... I hope this helps.

Step1 Turn off your computer and unplug. Remove the left and right side panels.

Step2 Remove the covering of the drive bay that you plan to use for your new CD/DVD Drive.

Step3 Set the jumper. This is the most difficult part involved with the installation process. If you only have one drive for your system set your jumper on the back the drive to Master. If you have two or more set it to slave. Consult your drives manual to see a picture of what a master/slave jumper configuration looks like. It is best to have the fastest drive set as the master.

Step4 After you have set the jumpers insert the drive into the empty drive bay you selected.

Step5 Secure your CD/DVD drive to your computers chassis with screws and a screwdriver. Mounting screws are typically included with your drive.

Step6 Locate and connect the required power and IDE cables to the back of the drive. These cables are keyed, meaning they are shaped specifically for that drive. It's impossible to install the wrong cables.

Step7 Put the side panels back on and plug your computer back in. Turn it on and your computer should recognize the new drives. If they are not recognized you may need to install the drivers, which are usually included on a CD that's included with your new drive.

I hope that helps. If you have any more questions, let me know.

Please go to the link below then download yoru driver on your computer. Once you have it on the computer just doubleclick the file to run it. That should install the printer. If in case you still have a problem please dont hesitate to reply back.

http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0

I am sending you a link which describes the replacement of the Memory stick in the computer. Please check it out and let me know if this helps. The link is as follows:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01122797/c01122797.pdf

Do get back in case you need more information.

Hi, It might be a good idea to completely uninstall the printer from your computer altogether, also unplug it and then restart your PC. Then shut it back down and then plug the printer back in and restart. Are you using Windows XP if so the PC should see the printer when it boots and will require instalation. Please note if your printer originally required you to first install the software before attaching the printer to the PC then you should follow the original instalation requirements. Let me know how you go.

well this is the link for you to download drivers for your compaq desktop

http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers

just type your compaq desktop model no ...for eg.compaq presario v 6000..you need to know your model no in order to download drivers for your desktop pc...

for windows xp if you want networking between your computers attach your computers with cross cable and right click on my computer for system properites > there you will see computer name tab > there you will see network id button > click on it and run the installation on all the computers you want to be in network....
-------------------------------------------
Please let me know your feed-back.

Thanks
dilipbagdi
Technical Associate

t
-------------------------------------------
Please let me know your feed-back.

Thanks
dilipbagdi
Technical Associate