I can't instal windows xp on this bord msi p4m800-m7 rev:3.1

xp driver can support vga to window xp

Hello the homepage is here:

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=94#dl

But the driver for win 7 is not there.
It will not help to download the xp driver
My advise is to buy a graphic card that supports win 7
The mainboard have an AGP 8X Slot for extenal graphic card

If you are in doubt adding a graphic card
let a expert do it for you.

Good luck

hi... I suggest you need to FORMAT your hard drive do partitioning and then you can proceed to installing your Windows XP and OS...install audio driver if needed by your sound card...wallla..its seems as new...pls. rate and vote...good day

no beep or no sens

on windows xp???mybe some your hardware having problem??
1. try to check your memory.
2. your cable in side the PC
3. Or some of your hardware not support with OS your install

Based on the information given here, the p4 d processor is supported by your motherboard. There should be no problem in making the switch.

the problem is with the new ram.
its phsically damged.
may be little bit that you cant see it.
try checking the other 1GB ram.

Mabye the disc is scratched, or SP3 has some fixes that allow it to install, and SP2 doesn't.

try to clean the ram slot then try again . Also read the motherboard manual if it supports your new ram or not .






Please rate me .

Hi, John

The USB 1.1 and USB 2.0 is a big issue regarding technology, the 1.1 has maximum speed of 12 megabits where as 2.0 has upto 480 Mbps. And all USB 2.0 devices are compatible with 1.1. Windows XP Home Edition and Windows XP Professional are both fully USB 2.0-compliant with the correct drivers.

So in your case it must work properly. But if the USB 2.0 from microsoft got currepted or badly updated by some thirdparty USB 2.0 driver then it will not work. I have been faced this problem. After doing some stuff I found that if I uninstall the USB drivers and reinstall it from microsoft driver then it works.

So, just go to the Device manager and un-install the USB drivers, then reboot the system to parmanently delete the removed driver. Then install the driver from Windows XP CD.

good luck

Thanks
Iqbal