I need 3 digit code for my daewoo tv - Computers & Internet

Your TV is made by Daewoo and is distributed by Daytek.

Hello
Three digit universal remote setup codes to check with Daewoo TV are:
004/ 005/ 009/ 017/ 018/ 019/ 042/ 058/ 082/ 083/ 085/ 097/ 100/ 126/ 127/ 130/ 138
OK.

Hello, Cheri Torres with DISH Network Customer Service here. We have a few different codes for each of our different models of remotes. The model number of your remote will be located on the back of the remote at the top, normally a two to three digit number with a decimal point. I will list here for you the best codes for each of our more popular models of remotes and the instructions for addressing the remote to the Daewoo TV. I hope this information helps and if you have any other questions please let me know!

Models of remotes Remotes codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 531, 719, 672, 664, 727, 524, 816.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 719, 531, 524, 526, 727, 529.
4.0 and 4.4 IR/UHF remotes - codes 719, 727, 733, 531, 524, 816.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 531, 719, 727, 573, 524.
20.0 IR and 21.0 IR/UHF remotes - codes 531, 528, 684, 524, 630,684.

Instructions for addressing the remote to the TV
1. Turn TV on.
2. Press and hold down the TV mode button until all other mode buttons light up red.
3. Enter the 3 digit code for your TV.
4. Press the pound(#) button once.
5. Test the functionality of the TV on the DISH remote.

Code Search Results--> --> Code For Model RCU300T
Code 004 for Daewoo TV Code 005 for Daewoo TV Code 006 for Daewoo TV Code 016 for Daewoo TV Code 017 for Daewoo TV Code 082 for Daewoo TV Code 171 for Daewoo TV Code 190 for Daewoo TV This is a basic set of codes for the TV, I am not sure of the model on the remote so I can only give you what I have. If these won't work, add a 1 in front of these 3 digit codes to make a 4 digit code, this should work. Good luck

daewoo tv uses one of the following codes .. (for late model remotes .. earlier remotes only have 3 digits)
1004, 1005, 1006, 1014, 1015, 1016, 1103, 1137, 1151, 1223, 1253

if you have an older remote that requires only 3 digits .. then we can try to find that for you as well but sometimes the codes are not in the older universal remotes ..

Daewoo 0 4 5 1 ,0 0 1 9 ,0 6 2 3 ,0 6 2 4 ,0 0 9 2 ,0 0 3 9


Please rate our help to keep the FREE service online++++Thanks for using FIXYA

Hello tuckertyrone,

Here are the 4 digit remote codes for a Daewoo tv.

0130 0004 0009 0100 0005 0138 0043 0140 0039 0252 0279 0444 0080 0042 0058 0017 0010 0126 0018 0127 0019

As you can see there are quite a few. Hope this gives you the information you were looking for.

Thanks,
edgin96





I’m happy to assist further over the phone at https://www.6ya.com/expert/ryan_7b238a1b08d97b98

Hello dennisdl,

Try one of these codes, hopefully one of them will work for your model Daewoo:

0101
1501
1511
2611




I’m happy to assist further over the phone at https://www.6ya.com/expert/ryan_7b238a1b08d97b98

I NEED CODES FOR SHARP REMOTE CONTROL RM-332E CHUNGHOP

For Daewoo TV Model DTQ-27U4SC, try this for Comcast Universal Remote (one with the red select button):
1. Press TV button
2. Press Setup button until TV button blinks twice
3. Enter 10451
4. Press Power button (TV should turn off and is set)