Obtaining the Chassis Serial Number
· On a standalone
switch:
Log in to the switch through Telnet or the console interface, and then run the
display elabel backplane command in the user view to view electronic label information. In the command output, the
BarCode field indicates the chassis serial number.
<Quidway>
display elabel backplane
Info: It is executing, please wait...
[BackPlane_1]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=EH02BAKK
BarCode=2102113089P0BB000881
Item=02113089
...............
· In a CSS:
Log in to the master
switch through Telnet or the console interface, and then run the
display elabel backplane chassischassis-id command (
chassis-id specifies the CSS ID of a member chassis) in the user view to view electronic label information. In the command output, the
BarCode field indicates the serial number of the specified chassis.
<Quidway>
display elabel backplane chassis ?
INTEGER<1-2> Chassis ID
<Quidway>
display elabel backplane chassis 2
Info: It is executing, please wait...
[BackPlane_2]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=EH02BAKK
BarCode=2102113089P0BB000881
Item=02113549
...............
NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the chassis ID according to the help information.
Obtaining the Serial Number of a Card
Log in to the master switch through Telnet or the console interface, and then run the
display elabel command in the user view and specify a slot ID according to help information to view the electronic label of a card. In the command output, the
BarCode field indicates the serial number of the card.
<Quidway>
display elabel ?
<1-1> The present chassis
backplane Backplane
brief Display information briefly
<Quidway>
display elabel 1/?
<4,6-8> <CMU1>
<FAN1-FAN2> <PWR1-PWR2>
<Quidway>
display elabel 1/6 brief
Info: It is executing, please wait...
[Slot_6]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0
[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=ET1D2S08SX1E
BarCode=020LVF6TBB000043
Item=03020LVF
...............
NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the slot ID according to the help information.
Obtaining the Serial Number of a Power Module
Log in to the master switch through Telnet or the console interface, and then run the
display elabel command in the user view and specify a slot ID according to help information to view the electronic label of a power module. In the command output, the
SN field indicates the serial number of the power module.
<Quidway>
display elabel ?
<1-1> The present chassis
backplane Backplane
brief Display information briefly
<Quidway>
display elabel 1/?
<5,8,13,16> <CMU1>
<FAN1-FAN5> <PWR1-PWR4>
<Quidway>
display elabel 1/PWR1
Info: It is executing, please wait...
[Slot_21]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0
[Main_Board]
DATE=13_02_08
SN=A664A0212080086V0.9A
NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the slot ID according to the help information.
Obtaining the Serial Number of a Fan Module
Log in to the master switch through Telnet or the console interface, and then run the
display elabel command in the user view and specify a slot ID according to help information to view the electronic label of a fan module. In the command output, the
BarCode field indicates the serial number of the fan module.
<Quidway>
display elabel ?
<1-1> The present chassis
backplane Backplane
brief Display information briefly
<Quidway>
display elabel 1/?
<5,8,13,16> <CMU1>
<FAN1-FAN5> <PWR1-PWR4>
<Quidway>
display elabel 1/FAN2
Info: It is executing, please wait...
[Slot_18]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0
[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=LE02FCMC
BarCode=2103010JTF0123456789
Item=02120995
...............
NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the slot ID according to the help information.
×