I re-format my cpu then the audio was gone - Computers & Internet

Check the CPU fan. If it is running properly, the problem may be due to some virus attack. Get it formatted and reload software. If the problem persists, your mainboard might have gone faulty or the CPU fan is running slow

http://www.intel.com/products/embedded/chipsets_resources.htm

Please provide the model and product information. We will provide you the audio drivers.

remove audio card, if computer work shotdown and insert back audio card if machine down, remove and replace that audio card with new one.

Hello,
Here are the settings for setting the CPU freq. I am not sure how the formatting will come out once I post this.

JP8 JP9 CPU Frequency
Short 1-2 Short 1-2 100MHz
Short 2-3 Short 1-2 133MHz
Short 2-3 Short 2-3 166 MHz
Short 1-2 Short 2-3 200 MHz

If that doesn't come through good enough, you can get all the jumper settings from the manual which you can download from:

ECS KT600-A Support

(The download is in zip format.)

Thanks for using Fixya.

sol1:remove antivirus
ofter that install da audio drivers


sol2:

freshly format da system
and install da drivers

Download from
http://www.topshareware.com/download-audio-driver-mercury-945/downloads/1.htm
and burn a CD for future.

www.download.com

• Manufacturer: Jetway computer
• VIA P4M266A (CE) Chipset Support Socket478 pentium 4 CPU 533MHz F.S.B
• Support Hyper Treading CPU
• Support ATA133
• Support 168-pin DIMM and 184-pin DDR RAM
• 4x AGP VGA Mode
• Support USB2.0.
• Onboard LAN
  hope this helps

AC 97 Audio Driver is missing, Added an additional hard drive, now I have no sound.